CENTA Power Transmission

News

Media

Torsionally very soft coupling for diesel drives

 ← back...


CENTA will be presenting its CENTAMAX, a coupling with high torsional flexibility for diesel-driven engines, at the InnoTrans Trade Fair in Berlin from 23. 26. September 2008. The coupling provides the flexible connection between engine and gearbox for a fail-safe operation in locomotives, gensets, and splitter gears.
 

Developed especially for drives subject to torsional vibration, CENTAMAX couplings with performance ranges of 0.1 to 48 kNm are among the highest torsionally elastic couplings available on the market. As a flexible connection between engine and gearbox, CENTAMAX couplings shift critical speeds far below idling speed and allow them to utilize the whole engines working speed without limitation. The drive train is then subjected to very low continuous vibratory torques and stress on the aggregates is reduced. Another important advantage is the couplings fail-safe operation under misfiring conditions. In addition, the coupling offers torsional softness and a linear characteristic which ensure that resonances are not shifted by the low load.

The essential design principle of the coupling is based on a rubber disc, vulcanized to the inner hub and with tooth engagement on the outer ring for blind-fitting to the drive flange. Special material mixes of natural rubber or silicone are used to ensure the couplings high allowable energy loss for dissipating inside heat caused by vibrations and misalignment. In the new "High Thermal Capacity" (HTC) design, the rubber disc of the CENTAMAX is divided into two slim disc halves. This increases heat dissipation by another 100 %, prolongs the couplings service life, and allows the usage of a smaller coupling in many applications. With its short design and axial plug-on features, the coupling is the perfectly suited for a connection to flywheels in diesel engine flange housings.

The CENTAMAX will be showcased at the InnoTrans Trade Fair, Berlin, in hall 20, stand 115 from 23. 26. September 2008.

The innovative CENTA couplings and drives have ongoing adaptations to the most recent technical demands and requirements. A wide range of innovations has made the company, with its near 40 year history, one of the worlds leading manufacturers of flexible couplings and drive shafts for industry, marine, and wind power applications. Further information to be obtained at www.centa.info

 

 ← back...


PDF Download

International · 32 kB
German · 31 kB


Text Download

International · 3584 kB
German · 3585 kB



JPG | 1181 x 645 Pixel | 243 kB




Terms for the use of centa press images

The shown images may be used for editorial purposes and in media coverage concerning CENTA in general. Other use is subject to permission by CENTA.

Copyright and proprietary rights lie with CENTA. Images used for the above mentioned purposes have to be marked "CENTA / name of the photographer". Print and publishing are free of charge. Kindly send a complimentary copy to:

CENTA Antriebe Kirschey GmbH
Marketing
Bergische Str. 7
42781 Haan/Germany


Leading by innovation
CENTA Power Transmission
CENTA Antriebe Kirschey GmbH

Bergische Straße 7
42781 Haan/Germany
Postfach 101125 - 42755 Haan
P.O. Box 101125 - 42755 Haan
 

+49-2129-9120 Phone
+49-2129-2790 Fax
, CENTA, CENTRA, CENTER, ZENTA, ZENTRA, ZENTER, Antrieb, Antriebe, Antriebstechnik, Antriebssysteme, Antriebselemente, Kupplung, Kupplungen, Kirschey, Kirshey, Kirshy, Kirschei, Kirschkey, Krischei, Krischey, GmbH, Lovejoy, Miki, power transmission, power transmissions, Haan, Hahn, 42781, 5657, D-42781, D-5657, W-5657, Germany, Deutschland, BRD, FRG, West-Germany,

CENTA
Power Transmission





CENTA International Site

CENTA Antriebe Kirschey GmbH

Bergische Straße 7
42781 Haan/Germany
Postfach 101125 - 42755 Haan
P.O. Box 101125 - 42755 Haan

+49-2129-9120 Phone
+49-2129-2790 Fax
+49-160-97202097 and +49-160-90941900 Customer support

info@centa.de








www.centa.info