CENTA Power Transmission

News

Media

CENTA expands coupling programme in the yacht industry

 ← back...


CENTA presents a new propeller shaft coupling with thrust bearing at METS 2010, Trade Fair for Boat Equipment and Accessories. Due to the use of new thrust bearings upgraded in performance, especially large yachts benefit from this CENTA solution.
 

A trend toward large sporty and comfortable yachts is becoming obvious in the yacht industry. CENTA stays abreast of these changes and presents a new propeller shaft coupling at METS 2010. The coupling designed for use behind the gear deflects the propeller thrust or pull to the boats hull by a thrust bearing. Therefore the motor remains free of propeller thrust and can be installed on highly flexible engine mounts.

New thrust bearing units with considerably higher propeller thrust make the coupling of interest especially for large yachts with high performance and torques above 15,000 Nm. Work boats also profit from the new CENTA solution regarding the workplace regulation for the protection from noise and vibration: Next to the compensation for considerable misalignments, the coupling also offers the damping of torsional vibrations and impulses as well as the interruption of structure born noise and vibrations. The noise level on board is considerably reduced. Further expansion of the range up to 50,000 Nm torque will be realised in the middle term.

The new propeller shaft coupling can be seen at METS in Amsterdam from 16-18 November 2010. CENTA can be found at Stand 04.324.

Since 1970, the international CENTA group has been engaged in solving complex drive train and torsional vibration challenges. Whether designing simple applications or complex systems: The wide range of flexible couplings, drive shafts and supplementary products with their numerous variations provide optimal results without compromise. Due to its various innovations, the company today ranks among the worlds leading manufacturers of flexible couplings and drive shafts for industry, marine and rail applications as well as for power generation. Further information can be obtained at www.centa.info

 

 ← back...


PDF Download

International · 10 kB
German · 10 kB


Text Download

International · 49 kB
German · 53 kB




Terms for the use of centa press images

The shown images may be used for editorial purposes and in media coverage concerning CENTA in general. Other use is subject to permission by CENTA.

Copyright and proprietary rights lie with CENTA. Images used for the above mentioned purposes have to be marked "CENTA / name of the photographer". Print and publishing are free of charge. Kindly send a complimentary copy to:

CENTA Antriebe Kirschey GmbH
Marketing
Bergische Str. 7
42781 Haan/Germany


Leading by innovation
CENTA Power Transmission
CENTA Antriebe Kirschey GmbH

Bergische Str. 7
42781 Haan/Germany
Postfach 101125 - 42755 Haan
P.O. Box 101125 - 42755 Haan
 

+49-2129-912-0 Phone
+49-2129-2790 Fax
METS 2010, yacht, work boat, propeller shaft coupling, CENTA, CENTA, CENTRA, CENTER, ZENTA, ZENTRA, ZENTER, Antrieb, Antriebe, Antriebstechnik, Antriebssysteme, Antriebselemente, Kupplung, Kupplungen, Kirschey, Kirshey, Kirshy, Kirschei, Kirschkey, Krischei, Krischey, GmbH, Lovejoy, Miki, power transmission, power transmissions, Haan, Hahn, 42781, 5657, D-42781, D-5657, W-5657, Germany, Deutschland, BRD, FRG, West-Germany,

CENTA
Power Transmission





CENTA International Site

CENTA Antriebe Kirschey GmbH

Bergische Str. 7
42781 Haan/Germany
Postfach 101125 - 42755 Haan
P.O. Box 101125 - 42755 Haan

+49-2129-912-0 Phone
+49-2129-2790 Fax
+49-160-97202097 and +49-160-90941900 Customer support

info@centa.de








www.centa.info